Bentonite Clay for ponds near Arkansas

How much Bentonite Clay for Ponds does my Pond needs?

The application rate varies depending on the type of soil of your pond. It can go anywhere from 2 lbs per square foot to more than 5 ponds per square foot, depending on how porous the soil i8s. For soils that have some percentage of clay content, using 2 lbs per square foot is usually enough. For silty soils, they are usually around 3 lbs per square foot. For sandy soils, about 4 lbs per square foot. For soils that are mostly composed of rock or gravel, you require at least 5 lbs per square foot.

Keep in mind these quantities are approximations and different ponds can have different needs.

Bentonite for ponds Calculator

Do you want to know how much bentonite your pond needs??

Use our Bentonite calculator to figure it out, you only need your pond measurements and the soil type.

Application Methods for Bentonite for Ponds

Blanket Method

1. Drain the pond.
2. Remove 4 to 6 inches of soil before depositing the bentonite. Leave the removed soil around the pond.
3. Evenly distribute the bentonite in the bottom of the pond area.
4. Cover the bentonite blanket with the 4-6 inches of soil you had removed before.
5. Compact the soil.
6. Fill the pond again.

Alternative Method

1. Drain the pond.
2. Evenly distribute the bentonite in the bottom of the pond area.
3. Disk or till the bentonite with the soil until it reaches about 4-6 inches depth.
4. Compact the soil.
5. Fill the pond again.

Check out our  Bentonite Pond Liner Installation post for more information on how to apply bentonite pond liner.

Sodium Bentonite Technical Specifications

Apparent viscosity —————— 15 cps min
Filtrate ——————————- 16 mls max
Moisture (2 hrs at 105°C) ———- 12% max
Particle Size (200 mesh) ———– 85% min

How the Bentonite For Ponds is Delivered in Arkansas?

For your convenience, we can deliver nationwide from our warehouses in Texas and Wyoming on flatbed trucks.

Please consider that you’ll need equipment to unload 3,000 lbs super sacks from a flatbed truck. These super sacks have straps on top to grab with your tractor, excavator, front loader, bobcat, or forklift so you can unload from the eighteen-wheeler flatbed truck.

A full truckload of bentonite clay for ponds is equivalent to 15 super sacks of 3,000 lbs each.
A full truckload of bentonite clay for ponds is equivalent to 45,000 pounds, which is approximately equivalent to 23 cubic yards.

All our super sacks come with a very efficient discharge valve. The location of the discharge valve is underneath the super sack, for effortless pouring. To efficiently release the pond sealant, you must pick up the bag and untie the valve to start pouring the liner on top of your soil.

**Pallets are NOT included**
If you require pallets, please call and request on your order (cost per pallet will be added to your order).

Bentonite Clay for ponds opinions